We Say
Pre-wash foaming with a snow foam style product has firmly established itself as a key process in many detailing enthusiasts' wash routines, primarily because it helps to ensure that the bulk of dirt removal is done before a wash mitt is placed on the car. However, choosing which snow foam to use can be tricky, as those that excel in terms of cleaning power (i.e. are capable of removing tough road films) are sometimes so strong that they strip existing layers of protection, while those that are gentler and kinder sometimes lack sufficient cleaning power to tackle anything more than fresh dust and grime. In response to this situation, Auto Finesse have developed a citrus-based snow foam that hits the sweet spot between these two extremes. Auto Finesse Avalanche contains the same powerful cleaning agents found in Auto Finesse Citrus Power, which enables it to dissolve and loosen tough road films and bug splatter without stripping existing layers of protection. Furthermore, it also offers excellent value for money too.
Key Features
Cleaning Strength8/10(Compared To Others)
Foaminess8/10(Compared To Others)
Recommended Dosage100 ml(In A PA Foam Lance)
Description
Auto Finesse Avalanche is a powerful pre-wash snow foam designed to safely loosen dirt and grime in a completely touchless fashion. Although best suited to regular use and tackling relatively fresh contaminants, it's also powerful enough to tackle more persistent road films that have gone through multiple wetting and drying cycles and become more firmly bonded. The main ingredients in Auto Finesse Avalanche are the same powerful detergents and organic solvents found in Auto Finesse Citrus Power. As you might therefore expect, it safely and effectively lifts tough dirt and grime without stripping existing layers of paint protection. Fast-acting and safe for use on all exterior surfaces, Auto Finesse Avalanche also rinses away easily to leave such surfaces perfectly prepared for hand washing.
Specification
| Chemical Basis | Detergent-based |
|---|---|
| Cleaning Strength | |
| Foaminess | |
| Maximum Dwelling Time | 5 minutes |
| Recommended Dilution Ratio | 100:1 (water:product) |
| Recommended Dosage | 100 ml (in a PA Foam Lance) |
| Strips Coatings | No |
| Strips Sealants And Waxes | No |
| pH | 13 (alkaline) |
How To Use
Auto Finesse Avalanche is suitable for use in any foam gun or foam lance system, as long as a final dilution ratio of approximately 100:1 (water:product) can be achieved. With regard to the systems we offer, the following advice applies: (i) for use with a , remove the foam gun body and pour or pump approximately 200 ml of Auto Finesse Avalanche into the bottle, then fill the bottle to the top with hot water, refit the foam gun body and shake the whole unit gently to mix the solution before finally attaching it to your hose - then squeeze the trigger and adjust the top dial on the foam gun body until you get the desired foam thickness; (ii) for use with a , remove the foam lance body and pour or pump approximately 100 ml of Auto Finesse Avalanche into the bottle, then fill the bottle to the top with hot water, refit the foam lance body and shake the whole unit gently to mix the solution before finally attaching it to your pressure washer - then fire the washer up, and adjust the top dial on the foam lance body until you get the desired foam thickness. In both examples given above, you can safely double the amount of Auto Finesse Avalanche used when tackling particularly dirty cars, or else halve it if only a light clean is needed.
